If you are searching for flooring options that come with prestige, look no further. Nothing beats the Denver Hardwood Flooring. It is pretty visually appealing and warm underfoot compared to the traditional stones or tiles. Meet your lifestyle needs with engineered, solid, or salvaged hardwood.
Some of the factors that influence the wood price include the manufacturer, wood make, finish, and installation. Floor choice should be determined by where the floor will be going and the room’s activity. Choose right, and you will enjoy your hardwood floor for the longest time.
Select Based on Your Lifestyle
First, consider the purpose of the room you want to install the Denver Hardwood Flooring and the amount and kind of traffic it will handle. Some precautions to keep in mind are:
• Is the room exposed to sunlight that could fade the floor surface?
• Will the floor be exposed to water (near a bathtub or dishwater) which could cause swelling to the floor?
• Will the floor be subject to scratching from pets, high heels, or toys from little kids?
The present-day hardwood comes with long-lasting polyurethane coatings that can withstand average wear. However, you must routinely maintain the floor to keep the surface in good shape. Engineered versions are known to do well in environments exposed to moisture, like the bathroom or basement.
Customize the Look
Manufacturers add textures to the hardwood to give them a scraped, satin, or a wire brush finish. The effects serve to boost the floor’s character and also conceal wear overtime. As for the dimensions, you may opt for the wide planks or the narrow strips.
Also, consider the wood’s hardness. If the floor sees a lot of activity, go for harder species such as hickory, oak, or maple. You may choose a low, medium, or high gloss finish. As you apply it, ensure it contains aluminum oxide to make it invulnerable to daily traffic wear.
Here is a guide for the hardwood you may consider for your flooring.
Solid Hardwood
Factory-finished solid hardwood comes ready to install. Compared to the solid hardwood finished on-site, this method minimizes the following:
• The curing that wood finished on-site requires
• Sanding dust
You may want the floor to be finished on-site if you want total control of the floor’s final look. All factory-finished floors come treated appropriately to protect them from scratches and fading. Solid wood reacts to temperature and humidity, making it unsuitable for bathrooms and basements.
Engineered Wood
Engineered wood is a veneer atop plywood. When shopping for this wood, consider the amount of protective coating, veneer thickness, and how many plys are at the base. It is a durable type of wood and lasts longer than solid wood. Engineered wood also has limited finishing options.
Reclaimed Wood
You can get reclaimed wood from local demolition sites or old buildings. It requires no cutting of trees, making it an environmentally friendly pick for your Denver Hardwood Flooring needs. It is treated and milled in the cracked areas before installation. The wood must be thoroughly dried after milling to get rid of critters.
Finally, Consider Maintenance and Repair
Grit-tracked in on shoes can cause damage to the hardwood floor. Rugs or mats will help catch the small dirt particles. Ensure that you vacuum clean the floor daily to make the floor last longer.